you are here:

Private Messages

You are not logged in.

Hot Topics

More Topics »

Login form

Welcome, Guest
Username Password: Remember me

Fitting rear LED blinkers and tail light
(1 viewing) (1) Guest
Share your modifications both the ones that worked and ones not worth doing.
  • Page:
  • 1

TOPIC: Fitting rear LED blinkers and tail light

Fitting rear LED blinkers and tail light 1 year, 8 months ago #5968

  • stingray
  • Fresh Boarder
  • Posts: 6
Bought an after market(from China) Stop tail light and LED blinkers,the Dept Motor Transport call them a Tidy Tail, a very neat unit I'm hearing a flasher unit is needed as LED's flash faster than standard blinkers, if so can the flasher unit (you can get them from Supercheap auto )be fitted at the rear of the bike and service the LED's only or has it got to be fitted to service the original front blinkers as well, the only wiring diagram I have been able to get hold of is (S model 2000-2004)I've got a 2015 Australian Model

Re: Fitting rear LED blinkers and tail light 1 year, 7 months ago #6072

I don't think you can get the flasher cam from super cheap as it's a 7 pin Suzuki special. What you can however get led resistors that can be wired in under the seat but you will need two. Also I found that the resistors get pretty warm after the blinker is on for a while so it may work out cheaper and I believe better, to purchase the led flasher cam and ledify the front indicators at the same time.
  • Page:
  • 1
Time to create page: 0.19 seconds